List of products by brand OSCULATI

It can run dry without damage. Vibration-free and very quiet. Internal bypass limits inlet pressure. Motor with permanent magnets and self-lubricating shaft. Thermal protection shuts off the motor in case of accidental overheating. Reverse polarity protection. Internal stainless steel bearings. Complete with four connectors (two 1/2" threaded connectors, one straight connector for 14 mm hose, and one 90° connector for 14 mm hose) and a suction filter, all with quick-connect fittings.

Marine socket for 16A - 230V dock electrical cable. Made of PA6, equipped with high energy efficiency contacts and an IP67-rated cover. The socket is designed for an ergonomic grip, and the rotating ring allows for secure attachment to the boat's socket with an IP67 watertight seal. The rubber cover ensures IP44 protection when not in use. The clean design and compact dimensions allow for convenient installation anywhere in the cabin. Compliant with European safety standard IEC 60309-5.

Made of thermoplastic with a removable transparent protective lid. Base 95 x 42 mm

Ground plate equipped with nuts and bolts. Made of porous bronze, ideal for achieving a proper ground during the installation of Loran, GPS, satellites, SSB radiotelephones and to help reduce radio interference.

Propus recessed LED light with reduced depth and adjustable profile. Complete polycarbonate housing with ring. Frosted lens. Single central LED. Screw fixing. Light type: 13.489.01/02 with fixed or dimmable light; see table to choose the ideal switch. 13.489.11/12 with dimmable light, with touch function (ON/OFF + dimmer) integrated into the glass.

Female connector. Socket: AISI 316 mirror-polished stainless steel + polycarbonate + nickel-plated brass contacts and rear cable exit protection. Plug: polycarbonate + silver-plated brass contacts. Cap: electric blue soft PVC plug cover. Voltage: 220/110V. Maximum Amperage: 50A

Made of nylon, fully articulated on 2 axes. Pulley Ø 24 mm for candlestick Ø 25 mm, cable up to 10 mm

Made of satin-finished 304 stainless steel, with a nylon pulley

PVC female connector protector. Socket: AISI 316 mirror-polished stainless steel + polycarbonate + nickel-plated brass contacts and rear cable exit protection. Plug: polycarbonate + silver-plated brass contacts. Cap: electric blue soft PVC plug cover. Voltage 220/110V. Max. Amperage 50A.

Includes: 2 spools of polyester thread 06.439.01/10.287.01, 1 piece of thread paraffin, scissors, 5 needles 10.286.00, 2.5 meters of self-adhesive Dacron 10.288.00, 1 palm guard, 1 square of Dacron fabric, 1 splicer 10.285.70, 1 awl 10.285.70. All in a handy plastic jar.

...

...

Equipped with a self-priming bronze pump with a neoprene impeller. Operates at the touch of a button. Permanent magnet motor with a stainless steel shaft and integrated macerator. White seat and lid. 19 mm (3/4") inlet pipe and 25 mm (1") outlet pipe. Control panel included. Spray nozzle connection ensures faster and more effective cleaning thanks to a high-pressure water jet covering the entire toilet bowl.

Made of polyester fabric with a waterproof polyurethane coating, with elastic around the perimeter for a better fit to the sides of the boat. UV resistant. Double stitching and perimeter rings for tensioning the cover.

For boats < 20 m. Removable with base in 316 stainless steel + nylon rubber. Inserting the pole activates the contact.

Anti-siphon device for use in drainage systems, seawater intakes, and toilets installed below the waterline. Hose holder diameter mm 13/19/25/32 (1/2"-3/4"-1"-1 1/4") 92x150 mm

Made of satin-finished 304 stainless steel, with a nylon pulley

Tubes Ø 17-20 mm Handle Ø 25 mm

To convert traditional manual or electric toilets (50.205../50.206.. / 50.207.. / 50.211.. / 50.217.. / JABSCO / RARITAN / RM69 / etc.) into vacuum toilets. The kit includes: the base pump unit and the electrical control panel. Self-priming pumps 16.193.12-24 and optional solenoid valves 50.203.10-11 are sold separately.