List of products by brand MEIHO

The SFC LURE CASE is the range of lure boxes that MEIHO manufactures for Tailwalk in a limited production run. It comes in four sizes—SS, S, M, and L—with a translucent gray lid, one-touch closure, and a stackable base. It's the versatile box of the collaboration: suitable for hard lures, soft lures, pre-rigged rigs, hooks, jig heads, and slow-feed jigs. SFC LURE CASE: four sizes to make the most of your space. The range isn't designed so you choose one size and that's it, but rather so that the four sizes together cover the actual space where you fish: vest, backpack, or bakkan. By combining sizes, you utilize the entire space, without the loose gaps that remain when all the boxes are the same size. First, measure the space, then choose the size. The gray lid isn't just...

Tamaño: 205×145×40mm

Material: polipropileno

Dimensión interior140mm

Ancho máximo de almacenamiento del tamaño VS-3010, dimensión interna 140 mm.

El tipo de almacenamiento de doble cara con una estructura triangular enfrentada hace un uso eficaz del espacio.

La parte plomada de Egi y el triple anzuelo del señuelo encajan en la ranura, eliminando el desperdicio de espacio.

Viene con conducto de drenaje de agua y se puede lavar completamente.

...

...

The REVERSIBLE D86-CLR is the double-sided tackle box from the collaboration between MEIHO and tailwalk, a limited-edition series. It opens and is usable from both sides—six cross-sections per side—featuring MEIHO's patented V-shaped seat and drainage holes in the lids. It's the compact tackle box of the collaboration: perfect for a life vest, waist pack, or kayak hatch. REVERSIBLE D86-CLR: Two sides in the same vest size. A standard tackle box utilizes only one side and wastes the volume of the lid. This one uses both: twelve cross-sections spread across two sides, measuring 140 x 104 x 32 mm. Two or three fit in a life vest, and its compact size also allows it to fit in a waist pack or the front hatch of a kayak, where space is measured in millimeters. The vertical dividers ac...

...

100x90x60

Very strong reversible box, ideal for storing swimming fish, surface lures, jigs, templates, etc. 200 x 126 x 36 mm

Size: 255×145×45mm Materials: Body: Polycarbonate resin Divider plate: Polypropylene comments 12 variable divider plates included You can store metal jigs, hard lures, baits, etc. placing them standing in each partition. It can be attached to the Bucket Mouse and Langan BOX series multi-purpose stands, as well as the BM-25 and BM-30 multi-purpose stands. A joining system is used to connect the socks together, providing excellent stability inside the box and providing sufficient performance as an inner box. The use of a drain pipe allows the product to be washed after use. This is an essential optional piece for everything from storage to actual fishing. Products that can be stored in the system: BM-9000, BM-7000, BM-5000, VS-7080, VS-7070, VW-2070>

Size205×115×45mmmaterial Body: Polycarbonate resin Divider plate: HG polypropylene with 10 variable divider plates included You can store metal jigs, hard lures, baits, etc. placing them standing in each partition. It can be attached to the Bucket Mouth and Langan BOX series multi-purpose stands, as well as the BM-25 and BM-30 multi-purpose stands. A joining system is used to connect the socks together, providing excellent stability inside the box and providing sufficient performance as an inner box. The use of a drain pipe allows the product to be washed after use. This is an essential optional piece for everything from storage to actual fishing. Products that can be stored in the system: BM-9000, BM-7000, BM-5000, VS-7080, VS-7070, VW-2070>

Size: 225×168×120mm Material: impact resistant polypropylene included 1 set of non-slip rubbers (4 pieces) Fits perfectly in BM-5000, VS-7090N, VS-7080N/VS-7080, VS-7070N/VS-7070, VS -7055N/VS-7055. It can store 48 pieces of various egis etc. Easy to take out and store, so changing lures is also simple. Since the stocker can be used alone, it is ideal for fishing in limited spaces, such as on a boat.

This box is the perfect accessory for keeping Tai Rubber and Tenya jigs, as well as other small fishing accessories, organized and protected. Its compact and functional design allows for quick and efficient jig changes. 6 individual compartments with lids. 18 x 4.2 x 3.4 cm

Handy clip that can be used as a rod hook by attaching it to an optional Bucket mouse series or Langan system BOX series component, or to a multi-holder. It can also be attached to a rod holder on a boat or tube and used as a rod holder, or the rod can be pinched like a clothespin. It is a convenient clip that can be used for multiple purposes regardless of whether you are on land or offshore. Can be attached to BM-25 and BM-30 multi-holders Made in Japan

Tamaño: 255×190×50mm

Material: polipropileno

La serie "REVERSIBLE" se puede almacenar eficientemente ahorrando espacio mediante la adopción de una estructura triangular enfrentada.

La parte plomada del egi y el triple anzuelo del señuelo encajan en la ranura, por lo que se pueden guardar sin desperdiciar nada,

y las amplias dimensiones internas son perfectas para guardar jigs. Viene con conducto de drenaje de agua y se puede lavar completamente.

Puede almacenar 14 señuelos con una longitud total de hasta 165 mm.

Size: 175×105×18mm Material: polypropylene Includes 15 variable dividing plates Designed to be only 18 mm thick, it can be carried without being bulky. In addition, both cases can be easily attached and the lid has an endless finish. The size is designed to fit perfectly into the top section of the Langan System BOX. This case provides great support for light spinning/rockfishing anglers etc. It can be attached with the J-slotted foam sleeve, so it can be used in any situation.