LLAVE CORTABATERIAS

Panel with five magneto-thermal circuit breakers, five luminous watertight switches and a cigarette lighter. Black anodized aluminum plate. It has one ON-OFF-ON switch with a 10 amp circuit breaker, three ON-OFF switches with two 15 amp circuit breakers. and another 10 amp. and a fifth MOMENTARY-OFF with 10 amp circuit breaker. suitable for speakers. Measurements: 170x90 mm, vertical mounting. Complies with ISO10133-IP 56 standards.

Cable exit possible on 4 sides. Max. capacity at 50V DC - for 30 seconds: 1000 A. Max. capacity at 50V DC - continuous: 300 A. Max. capacity at 50V DC - intermittent: 500 A. Pin diameter: 10 mm.

Panel with 3 ON-OFF switches with LED indicator (16 A 12 VDC) and resettable circuit breaker (5, 10, 15 A cut).Ext dimensions: 130.2x111.3 mmDimensions between screws:117.5x76 mmCutout dimensions: 99.1x82 mm Includes switch type labels and screws....

Switch-type circuit breakers with front fixing with screw. For replacement or expansion in panels. Distance between screws: 43 mm....

WATERTIGHT BATTERY DISCONNECTOR M-750 FOR 2 GROUPS OF BATTERIES. WITH KEY MADE OF ANTI-CORROSIVE PLASTIC MATERIAL. CAPACITY: 310 AMP. IN CONTINUOUS AND 500 AMP. FOR 5 SEC. RECESSED OR SUPERIMPOSED MOUNTING MAXIMUM VOLTAGE: 36 V. Ø 140 MM. HEIGHT: 90 MM....

Continuous 315A Intermittent 450A Perko Brand

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

Circuit breaker recommended for protecting windlasses and other high-power loads. Flush-mounted. Protects the windlass from overload and short circuits. Maximum voltage: 42 VDC. Cut-out dimensions: 48 x 39 mm. Distance between bolts: 60 mm.

Switch with plastic body and lever, stem and nut in chrome-plated brass. FOR PANELS UP TO 3/8'' = 9.5 MM. BUTTON: MOM ON - OFF - MOM ON