REINFORCED BATTERY DISCONNECTOR WITH KEY

High capacity fuse holder box. Without fuse. ANL

...

2-position battery disconnector Circuits: 1 (ON/OFF) Continuous: 350 A Electricity: 48V DC Intermittent: 600 A Measurement: 98 x 98 mm Reinforced polycarbonate body, tinned copper contacts and terminals. Function indicator ring. Allows surface or recess mounting. With AFD alternator disconnection (BS9004-BS9002-BS5510-BS5511). Max 0.25 sx 10: 1750 A

Remote battery disconnect switch for disconnecting and connecting batteries via a push button, with an emergency manual function. It can be operated remotely or on-site. Made of plastic with brass contacts. Features an output signal for installing a control LED. Voltage: 9.5V-32V. Current: 275A continuous, 455A intermittent. Starting current: 1250A. Power consumption (off): 12mA. Power consumption (on): 15mA. Switch operation: 120mA for 3 seconds at 12V nominal.

Panel with 5 ON-OFF waterproof switches (20 A 12 V/10 A 24 V) with circuit breaker (3x5, 10, 15 A). Includes a cigarette lighter socket with circuit breaker (5 A). Made of anti-UV black plastic. Includes screws and labels for the switches.Ext dimensions: 191x111 mmCut dimensions: 169x81 mm...

...

...

Waterproof battery disconnector for two batteries.Watertight battery disconnector for two batteries. Made of anticorrosive plastic material. Capacity: 280 amps. continuous and 345 amp. momentarily. Recessed or surface mounting. Measurements: 102 x 102 x 67 mm....

Waterproof battery disconnector for batteries. Made of anticorrosive plastic. Can be flush or surface mounted. Complies with the ISO-8846 standard.Continuous capacity: 300 AInstantaneous capacity (5 s): 1000 AMaximum voltage: 48 VDimensions:w/key: 69x69x71.6 mm without the key and 69x69x99 mm with the key.w/button 1 battery: 69x69x75 mmc/button 2 batteries: 69x69x75 mm...

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

Cable exit possible on 4 sides. Max. capacity at 50V DC - for 30 seconds: 1000 A. Max. capacity at 50V DC - continuous: 300 A. Max. capacity at 50V DC - intermittent: 500 A. Pin diameter: 10 mm.

Circuit breaker recommended for protecting windlasses and other high-power loads. Flush-mounted. Protects the windlass from overload and short circuits. Maximum voltage: 42 VDC. Cut-out dimensions: 48 x 39 mm. Distance between bolts: 60 mm.