VICTRON BATTERY CHARGER BP BLUE SMART 24/12 IP22

...

The Blue Smart IP22 24/16 charger with one outlet is the new professional battery charger with integrated Bluetooth. The Blue Smart IP22 battery charger is the wireless solution to monitor voltage and current, change settings and update the charger when new features appear. Dimensions 235x108x65 mm. Weight 1.3 kg. High Efficiency With up to 94% efficiency, these chargers generate up to four times ...

Net Weight: 1.3 kg Dimensions: 235 x 108 x 65 mm Maximum Efficiency: 93% Nominal Charging Current: 15-19 A Protection Class: IP22 Input Voltage: 180-265 VAC Warranty: 5 years Bluetooth: Yes Type: Battery Charger Voltage: 12 V

Smart BatteryProtect disconnects non-essential loads from the battery before it is completely discharged (which would damage the battery) or before it runs out of power to start the engine. When using Bluetooth to program the Smart BatteryProtect, the necessary connection/disconnection levels can be set. Or you can set one of nine default on/off levels with the programming pin (see manual). If necessary, Bluetooth can be disabled.

The new Victron Blue Smart IP22 battery charger with integrated Bluetooth. With 93% efficiency, the Victron Blue Smart charger is a perfect solution. Also compatible with LiFePO4 lithium batteries. Bluetooth Smart: The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, changing settings, and updating the charger when new features become available. High efficiency: With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. And once the battery is fully charged, consumption is reduced to 0.5 watts, between five and ten times less than the industry standard. 6-stage adaptive charging algorithm: Check-Initial Charge-Absorption-Reconditioning-Float-Storage: The Blue Smart charger features micropro...

Remote control for TBB battery chargers model BS (reference IP010150, except the 12 V/10 A 1-S model). Allows you to switch between off, on and silent mode, as well as check the charger's charging and error status.

Winners of the IBEX Innovation Award, the third generation of digital chargers from Pro-Mariner, the PronauticP series combines digital charge control with software conversion technology with global energy management functions. With twelve charge profiles digitally controlled and a full digital display, ProNauticP offers functions not found in other chargers, such as self-diagnostic functions, rea...

...

Dimensions 60x120x200mm. Weight 1 kg. The galvanic isolator consists inside of two diodes connected antiparallel. When connected in this way, diodes allow current to pass in both directions, but only above a certain voltage threshold. The voltage at which the diodes are conducting is about 1.4 Vdc. The isolator is installed directly behind the 230V connection on your boat. The direct voltage comin...

Remar LiFePO4 battery chargers. They have the appropriate voltages and charging phases for our 36 V and 48 V LiFePO4 batteries. Nominal charging voltage: 36 V/25 A = 43.8 V 48/20 A = 58.4 V

UNICHARGE battery chargers Equipped with a state-of-the-art multi-stage charging algorithm, they perfectly charge 100% of all lead, liquid electrolyte, Gel, and AGM battery models without maintenance...

...