NAUTICAL SPORTS

Smart BatteryProtect disconnects non-essential loads from the battery before it is completely discharged (which would damage the battery) or before it runs out of power to start the engine. When using Bluetooth to program the Smart BatteryProtect, the necessary connection/disconnection levels can be set. Or you can set one of nine default on/off levels with the programming pin (see manual). If necessary, Bluetooth can be disabled.

Dimensions 73x94x37 mm. Weight 0.20 kg. High efficiency With synchronous rectification, full load efficiency exceeds 95%. IP43 protection If installed with the screw terminals facing downwards. Screw terminals No special tools are required for installation. Input voltage range 18-35 VDC Output voltage 12.5V Efficiency 97% Continuous output current 10A Maximum output current 12A Galvanic isolation No Off consumption < 45mA Working temperature range (power reduction of 3% for each °C above 40°C) -20 to +55°C

Dimensions 60x120x200mm. Weight 1 kg. The galvanic isolator consists inside of two diodes connected antiparallel. When connected in this way, diodes allow current to pass in both directions, but only above a certain voltage threshold. The voltage at which the diodes are conducting is about 1.4 Vdc. The isolator is installed directly behind the 230V connection on your boat. The direct voltage comin...

Blue Smart IP65 Bluetooth Battery Charger with DC Connector. Victron Energy's new professional charger with integrated Bluetooth. This allows you to view your charger information on your mobile phone, tablet or computer using the VictronConnect app. General features: -Intelligent seven-stage charging algorithm. -Automatic power supply function. -Protection against dust, water and chemicals. -Recovery of fully discharged 'dead' batteries. -Automatic compensation for high or low temperatures. -Various other features to prolong battery life. -Low power mode for charging small batteries. -Li-Ion battery mode. -Settings and configuration and voltage and current readings via Bluetooth Smart. Also suitable for Lithium (LiFePO4) batteries. Connect the battery easily The charger come...

Net Weight: 1.3 kg Dimensions: 235 x 108 x 65 mm Maximum Efficiency: 93% Nominal Charging Current: 15-19 A Protection Class: IP22 Input Voltage: 180-265 VAC Warranty: 5 years Bluetooth: Yes Type: Battery Charger Voltage: 12 V

The new Victron Blue Smart IP22 battery charger with integrated Bluetooth. With 93% efficiency, the Victron Blue Smart charger is a perfect solution. Also compatible with LiFePO4 lithium batteries. Bluetooth Smart: The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, changing settings, and updating the charger when new features become available. High efficiency: With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. And once the battery is fully charged, consumption is reduced to 0.5 watts, between five and ten times less than the industry standard. 6-stage adaptive charging algorithm: Check-Initial Charge-Absorption-Reconditioning-Float-Storage: The Blue Smart charger features micropro...

12V 2000W pure sine wave inverter with by-pass function Thanks to their maximum performance, safety and reliability, they are perfect for installation in campers, motorhomes and all types of vehicles. BLUGY inverters stand out for their unbeatable quality-price ratio. They provide maximum performance, maximum safety and reliability and are perfect for installation in campers, motorhomes and all types of vehicles. They have a remote control that clearly and simply shows the operation of the inverter and from which different parameters can be adjusted. Ideal for the operation of sensitive devices such as televisions, laptops, air conditioners or coffee makers. Main features They include a remote control panel and also have an on/off button and a small LED display integrated into the inver...

The Blue Smart IP22 24/16 charger with one outlet is the new professional battery charger with integrated Bluetooth. The Blue Smart IP22 battery charger is the wireless solution to monitor voltage and current, change settings and update the charger when new features appear. Dimensions 235x108x65 mm. Weight 1.3 kg. High Efficiency With up to 94% efficiency, these chargers generate up to four times ...

Victron Orion-TR, 24/24-5 Isolated DC-DC Converter (120W). This DC-DC converter stabilizes the DC voltage from a power supply or battery, producing a voltage higher, equal to, or lower than the input voltage. Remote On/Off: Thanks to a remote on/off switch, the Orion eliminates the need for a high-current switch in the input wiring. The remote on/off switch can be operated by a low-power switch or, for example, the engine start/stop switch (see manual). Adjustable Output Voltage: Can also be used as a battery charger. Suitable, for example, for charging a 12-volt starter or auxiliary battery integrated into a 24V system. All models are short-circuit proof and can be connected in parallel to increase the output current. An unlimited number of units can be connected in parallel. IP43 prot...

Remar LiFePO4 battery chargers. They have the appropriate voltages and charging phases for our 36 V and 48 V LiFePO4 batteries. Nominal charging voltage: 36 V/25 A = 43.8 V 48/20 A = 58.4 V

Remote control for TBB battery chargers model BS (reference IP010150, except the 12 V/10 A 1-S model). Allows you to switch between off, on and silent mode, as well as check the charger's charging and error status.

12V 800W modified wave inverter. This is a practical wave, with characteristics similar to the pure sine wave, although it is suitable for linear loads and switching of electronic equipment, such as light bulbs, electric stoves, etc.

UNICHARGE battery chargers Equipped with a state-of-the-art multi-stage charging algorithm, they perfectly charge 100% of all lead, liquid electrolyte, Gel, and AGM battery models without maintenance...