It can run dry without damage. Vibration-free and very quiet. Internal bypass limits inlet pressure. Motor with permanent magnets and self-lubricating shaft. Thermal protection shuts off the motor in case of accidental overheating. Reverse polarity protection. Internal stainless steel bearings. Complete with four connectors (two 1/2" threaded connectors, one straight connector for 14 mm hose, and one 90° connector for 14 mm hose) and a suction filter, all with quick-connect fittings.

Submersible bilge pump with built-in automatic switch. Made of ABS plastic, anti-scaling impeller and stainless steel shaft. Non-return valve at the outlet to prevent the return of water. 1 m connection cable. Complies with ISO 8849. Two-year limited warranty. Model/Voltage (Max. Flow) (Flow at 1 m) (Max. Height) (Max. Consumption) (Fuse) 600 GPH/12 V ( 557 GPH/2108 L/h) (243 GPH/920 L/h) (1.5 m) ...

...

...

New concept in automatic bilge pumps, the "SAHARA MK2." Manufactured almost entirely from highly impact-resistant plastic. Features include a permanent magnet motor, self-lubricating bearings, an AISI-316 stainless steel shaft, a heavy-duty polyester impeller, and stainless steel hardware. IMPROVEMENTS OVER THE MK1: • The patented X-Air™ impeller expels trapped air from the pump and piping. • External mounting feet and an integrated outlet reduce time and effort. • The universal mounting pattern simplifies replacement. • Attwood's SteadySwitch™ system reduces operating cycles and extends pump life. • 40% better protection against water ingress and electrolysis than the MK1. • Twice the protection against water ingress and electrolysis compared to leading competitors. Compl.................

Submersible bilge pump is extremely energy efficient, has a water-cooled motor for long service intervals. Compact all-in-one motor/impeller unit with stainless steel shaft (SS2343). No tools are required for maintenance, there is no need for complete disassembly. Now you can leave the pump housing connected to both the boat and the hoses. Detachable bilge pump. Pump body: thermoplastic. Shaft: Stainless steel 2343. Seal: Lip Interesting data TECHNICAL DESCRIPTION Works at 12V. Bilge pump with maximum intensity of 2.5 and 3A. It carries a capacity of 50 and 80 L / min. It has an outlet pipe diameter of The product weight is 0.27 and 0.32 Kg. With a width of 88 mm, length of 80 mm and a height of 112 mm.

High-flow electronic submersible bilge pump 2250 GPH

Submersible pump made of high resistance plastic, compact and light. Stainless steel shaft and bearings.Flow rate/Voltage (Max height) (Consumption) (Fuse) (Dimensions) (Hose diameter)1750 GPH (6624 L/H)/12 V (13.5 ft (4.1 m)) (10A) (15A) (144.3x120.5x164.5mm) (1 1/8" 29mm)1750 GPH (6624 L/H)/24V (13.5ft (4.1m)) ( 5A) (7A) (144.3x120.5x164.5mm) (1 1/8" 29mm)2300 GPH (8706 L/H)/12V (11.8f...

...

14 AMP. 12/32 V / 115 x 40 x 50 MM.20 AMP. 12/32 V ...

...

Manual pump for bilge and washdown. Made of plastic and neoprene material, stainless steel handle and screws. Includes kit with cover and bellows for recessed mounting below deck or in side bulkhead. Input connections: 25 mm, output connections: 25 and 32 mm, capacity: 22 liters in 30 strokes. Measurements: 230x210x130 mm....