Low-profile automatic bilge pump for confined spaces. Maximum bilge capacity 900 gallons/hour.

FOR 12 OR 24 V PUMPS UP TO 20 A. ACTIVATED AT A LEVEL OF 50 MM. DEACTIVATED AT 20 MM. A 3-SECOND DELAY PREVENTS FALSE IGNITIONS. 85X65X32 MM.

Waste water. 900 W Max. height: 8.5 m Max. depth: 7 m Max. solids passage: 35 mm Flow rate: 15500 l/h

Automatic pump with variable motor speed, proportional to the required flow. Constant pressure. They do not require a pressure accumulator. Universal voltage 12/24 V. Automatic stop in case of failure: empty tank, overloads and short circuits. Warning of the operating status by means of a luminous LED. Chambers 3 Electricity 12 / 24 V Flow Speed 15 l/min Brand Frame Model / OEM 164 602 15 Pressure 2.5 bar

...

Lever-operated polypropylene manual pump ideal for supplying chemical fluids from drums: water, windscreen washer fluids, antifreeze, detergents, agricultural chemicals, DEF, AdBlue®, etc. Includes a sliding adapter for 2" drum with adjustment nut and a 3-piece telescopic suction tube for ease of use. Fluid delivery: +- 0.5 l/stroke. Temperature range: -5ºC +45ºC. Weight +- 980 g Telescopi...

...

Manual bilge pump for mounting through bulkhead. Made of polypropylene with white ABS plastic lid.Inlet and outlet connections: 1" (25 mm) 1 1/2" (38 mm) Mounting depth: 145 mm Lid length: 212 mm Possibility of mounting it in all positions....

Dirty water.750 WMax. height: 8 mMax. depth: 7 mMax. pass. of solids: 35 mmFlow: 13500 l/h...

...

Power: 1,300 W Voltage and Frequency: 230V/50Hz Maximum Pressure: 1.1 bar Cable Length: 10 meters Cable Type: H07RN-F3G 1.0mm² Insulation: IPX8 Maximum Liquid Temperature: 35ºC Outlets: G1”- G1.1/2”; Ø 1”-1.1/4” Maximum Head: 11 meters. Maximum Depth: 5 meters. Maximum Flow Rate: 25,000 liters/hour. Maximum Solids Passage: 40 mm. Stainless Steel Body. Weight: 7.78 kg Dimensions: 440x310x240 mm

Transfer pump for all types of liquids (water, diesel, gasoline, etc.) from one container to another without mess and effort. Insert the pump into the container with the liquid to be transferred, along with the end of the tubing into which the liquid will be transferred. By placing the second container at a slightly lower level than the first, simply agitate the pump in the liquid to raise it to the gooseneck of the tubing. At this point, the transfer will be activated by "falling" into the receiving container. To stop the flow, simply remove the pump from the liquid. Made of copper and complete with 1.7 m of tubing. No electricity required; fast, safe, and clean.

Microswitch activated by a steel ball. For voltages from 6 to 32 V.

Manual bilge pump made of stainless steel, polypropylene, nylon and nitrile.

Volts: 12V Flow rate: 3.4GPM - 12.9L/min Pressure: 5 bar (70psi) Fuse: 15A Quick connect: 1/2" hose Dimensions: 215 x 224 x 112 mm

The TA3P10-19 macerator pump takes care of toilet waste. A rotary cutter shreds the waste before it is pumped into or out of the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet. Ignition protected motor, conforming to ISO 8846 Marine. Mounting bracket for easy replacement. Extremely energy efficient. Self-priming up to 1.2 metres, bronze body with nitrile impeller. Flow rate: 32 litres per minute. Dimensions: 190 x 120 x 98 mm, weight: 3 KG. Voltage 12 volts at 10 amps.