CENTRAL FRAME WATERPROOF SWITCH

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

...

Circuit breaker recommended for protecting windlasses and other high-power loads. Flush-mounted. Protects the windlass from overload and short circuits. Maximum voltage: 42 VDC. Cut-out dimensions: 48 x 39 mm. Distance between bolts: 60 mm.

...

PULL-OUT KEYMAIN CIRCUIT BREAKERMARINE POLYCARBONATE BODY AND NON-CORROSIVE METAL CONTACTS FOR SURFACE INSTALLATIONS....

Main battery circuit disconnector. ABS plastic body. Max. voltage: 50 V Max. continuous: 275 AMax. for 5s: 455A...

...

...

High capacity fuse holder box. Without fuse. ANL

Cable exit possible on 4 sides. Max. capacity at 50V DC - for 30 seconds: 1000 A. Max. capacity at 50V DC - continuous: 300 A. Max. capacity at 50V DC - intermittent: 500 A. Pin diameter: 10 mm.

Four-switch panels with blue light LEDS. Voltage: 12-24V.

With neoprene protector, suitable for starting. Made of chrome-plated brass. Maximum current: 30 amps, mounting diameter: 14 mm, length: 72 mm, diameter: 28 mm.